Two sensors, two different jobs
A door/window contact sensor reports open or closed state at a fixed point, so it is the natural choice for entry points, cabinets and letterboxes. A PIR motion detector reports movement across an area, so it belongs in rooms, corridors and driveways. They are not interchangeable, and a well-designed WiFi alarm range usually carries both. Getting the sensor type right per position is the first specification decision a brand makes.
Battery choice decides the support story
A contact sensor can run for months on a coin cell such as a CR2 or a pair of AAA cells, while a PIR that transmits on every trigger drains faster and is often happier with a larger battery. Battery life claims should be tied to a defined trigger count, not a wall-clock estimate, because a hallway PIR and a rarely-opened window sensor have very different duty cycles. Confirm the low-battery behaviour and the replaceable-versus-sealed battery design before you commit.
- Match battery type to duty cycle
- Ask for trigger-count, not just months
- Confirm low-battery reporting in the app
- Check if the battery is user-replaceable
Specify tamper, pairing and RF behaviour
A tamper switch that fires when the housing is opened or removed from its bracket is standard on security-grade sensors and should be present on anything sold for alarm use. Ask how pairing recovers after a power or network interruption, how many sensors a single hub or chime can hold, and whether the RF link is proprietary or part of the Tuya Smart / Smart Life ecosystem you already use. These details are cheap to confirm early and expensive to change after tooling.
Validate sensitivity and false-trigger behaviour
PIR sensitivity, detection angle and pet-immunity are the variables behind most nuisance-alert returns. Request a sample, mount it at the intended height and angle, and test against the real traffic - sunlight, pets, passing vehicles - before a volume order. A sensor that works in a demo video and one that works in a customer's hallway can be two different products.
- Mount height and detection angle
- Pet-immunity for residential
- Sunlight and false-trigger testing
- Real-site sample before volume
Related Articles
How to Choose a Wireless Doorbell Manufacturer (Without Getting Burned)
A factory checklist for buyers sourcing wireless doorbells at volume: approvals, range testing, tooling ownership and QC evidence.
Category GuideWater Leak Detectors: The Under-Rated Category in Security Catalogues
Why leak, sump and valve-controller SKUs convert better than commodity sensors, and how to build a three-tier range.
OEM / ODMOEM vs ODM for Smart Home Hardware: Which Route Fits Your Budget?
A practical comparison of rebranding an existing platform versus starting from a new industrial design.