Shared Platform Specification
All 3 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.
| Product families | Classical Series / B Series / D Series / Touch Activated H Series / X Series |
|---|---|
| Ringtones | 52 ringtones (16 chord) to choose from |
| Volume | 4 steps volume control, 25-110 dB |
| Transmitter protection | IP55 / IP44 waterproof transmitter |
| Operating range | Up to 1000 ft in open space (Classical / B / D series); up to 600 ft (H / X series); 100 m audible range |
| Installation | Simple to use and easy to install - no wiring; plug the receiver into an AC outlet and mount the transmitter |
| Expandability | Expandable - able to pair various transmitters to the receiver |
| Interference | Learning code to prevent interference from other wireless transmitters |
| Indication | Eye-catching indicators alert you when the doorbell cannot be heard |
Model Differences
The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.
| Model | What differs | Source |
|---|---|---|
| Q1 | Fabric faceplate pattern 1; shared series platform | 2026 catalog |
| Q2 | Fabric faceplate pattern 2; shared series platform | 2026 catalog |
| Q3 | Fabric faceplate pattern 3; shared series platform | 2026 catalog |
Model-by-Model Guide
Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.
Fabric faceplate variants (Q1 / Q2 / Q3)
In the Q Series Fabric Wireless Doorbell range, Fabric faceplate variants (Q1 / Q2 / Q3) are handled as one group. The Q series is the fabric-finish line of our wireless doorbell range - a soft textile faceplate instead of the moulded plastic used across the Classical, B and D families, aimed at buyers whose differentiation is home décor rather than electronics. Q1, Q2 and Q3 share one wireless platform and differ in the fabric pattern and housing finish. The 2026 catalog does not print per-model electrical figures for the Q series, so request the datasheet for the complete specification. These models are grouped because the printed sources do not state a per-model electrical difference for them; writing a separate positioning for each would invent a difference that does not exist. Request samples to compare the exact appearance before committing to a SKU.
Key Characteristics
Established platform with multiple regional plug standards
Configurable chime set, receiver face and colourway
Custom logo, packaging and bundle composition
In-house tooling, SMT, assembly and test
Samples typically prepared in 5-7 working days
Applications
- Retail DIY doorbell ranges
- Distributor private label
- Property and hospitality fitting
- Promotional and seasonal SKUs
OEM / ODM Options
- Housing / faceplate / colourway
- Logo, artwork and retail packaging
- Plug standard and regional configuration
- Firmware identity, chime or alert behaviour
- Bundle / kit composition
- Documentation and multi-language inserts
Downloads & Next Steps
Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.
Frequently Asked Questions
What is the minimum order quantity?
MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.
Can we request samples?
Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.
Do you accept factory audits?
Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.
Will you sign an NDA?
Yes, before drawings or commercial details are exchanged.
Who owns the tooling?
Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.





