W6 Smart Door Contact product photo
Product photos · OEM/ODM variants available
W6 · Smart Security

W6 - Smart Door Contact

Smart Door Contact from the Contact Sensors range, manufactured by Shenzhen Shenan Yangguang Electronics Co., Ltd. in our owned Shenzhen facility. Available for OEM/ODM programmes with configurable housing, firmware identity, packaging and regional approvals.

Catalog P26Factory directSamples available

Technical Specifications

Transcribed from the 2026 printed catalog. Model-specific parameters are listed first, followed by the Contact Sensors family-wide rows; confirm the exact parameter set and certificate scope in the datasheet before ordering.

PowerDC 3 V
Working current< 150 mA
Standby current< 50 uA
Battery life1 year (20 times per day)
Installation gap< 20 mm
NetworkWi-Fi 2.4 G b/n/g
Operation temperature-20 C to 55 C, RH 10%-90%
InstallationNo hub required; real-time open/close detection and instant app alert
Product familyDoor/window contacts, standalone door alarms, PIR motion detectors, strobe sirens, doorbell push buttons, SOS buttons and 4-button remotes
Hub compatibilityWireless alarm accessories pair with the T10 / T11 / T30 WiFi alarm hub; W1 / W5 / W6 and HP03W are standalone Wi-Fi devices that need no hub
Engineering scopeMagnet tolerance, lens geometry, RF behaviour, standby current and battery life are validated together as one system
OEM / ODM optionsHousing, colourway, modular face cover, logo, radio configuration, multipack packaging and kit composition
DocumentationModel-specific electrical parameters, the pairing matrix and certificate scope are supplied in the datasheet before ordering
Model-specific catalog noteWiFi 2.4G

Printed Catalog Page

The specification table for this product family is printed in the 2026 catalog on page 26. Open the page at full size to read every parameter.

Overview

The W6 is part of our Contact Sensors line within Smart Security. It is built in a 10,000 m2 facility with 500+ staff and roughly 100,000 units of monthly capacity across the portfolio. Industrial design, electronics, firmware, tooling, SMT, assembly and functional test are performed in-house, so a change to the enclosure, the firmware identity or the packaging is handled by the same team that will run volume production.

This page is the online reference for the model. For dimensions, mechanical drawings and the model-specific certificate scope, request the datasheet - we supply the document set that actually applies to the SKU you intend to buy rather than a generic family certificate.

Key Characteristics

Door/window contacts, PIR motion sensors, sirens, push buttons, SOS buttons and remotes in one compatible accessory family

Magnet tolerance, RF behaviour and battery life engineered together

Modular face-cover and colourway options on the W1 / W5 / W6 contacts

Pairing matrix with T10 / T11 / T30 hubs confirmed in writing

Samples recommended for on-site range and compatibility testing

100% per-unit functional test

Commercial & Delivery Reference

Model / SKUW6
Product nameSmart Door Contact
Product line / categorySmart Security / Contact Sensors
2026 catalog referenceP26
Website reference modelMC08-W6 (online listing code used for photo matching)
Range statusCurrent production range
Compliance fileModel-specific Declaration of Conformity and test report references supplied on request.
SamplesExisting-platform samples are typically prepared within 5-7 working days.
Tooling & NREAgreed in writing at scoping; customer-funded tooling ownership is not assumed by the factory.

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.