WGC-01 Multifunctional CO & Natural Gas Alarm product photo
Product photos · OEM/ODM variants available
WGC-01 · Smart Security

WGC-01 - Multifunctional CO & Natural Gas Alarm

Multifunctional CO & Natural Gas Alarm from the Smoke, CO & Gas Detectors range, manufactured by Shenzhen Shenan Yangguang Electronics Co., Ltd. in our owned Shenzhen facility. Available for OEM/ODM programmes with configurable housing, firmware identity, packaging and regional approvals.

Catalog P32Factory direct2026 NEWSamples available

Technical Specifications

Transcribed from the 2026 printed catalog. Model-specific parameters are listed first, followed by the Smoke, CO & Gas Detectors family-wide rows; confirm the exact parameter set and certificate scope in the datasheet before ordering.

Printed page2026 catalog p32 - Multifunctional CO & Natural Gas Alarm (NEW)
Power supplyAC 100-230 V 50/60 Hz or 5 V DC via USB Type-C
Backup batteryBuilt-in 3.7 V 300 mAh rechargeable lithium battery
CO measuring range0-999 ppm, accuracy +/-10%
CO alarm threshold51 ppm
Natural gas rangeLv1-Lv4; Lv4 corresponds to 15% LEL
Humidity range0%-95% RH (+/-5%)
Temperature range-10 C to 50 C (+/-1.5 C)
Published functionsCO detection, natural gas detection, temperature and humidity monitoring, power-failure alarm
Smoke alarm SD-JPE-E10APhotoelectric sensor; DC 3 V non-replaceable CR123A; 10-year battery life; standby < 6 uA; alarm current < 55 mA; >= 85 dB at 3 m
Smoke alarm standardEN 14604:2005/AC:2008; -10 C to 50 C indoor; < 95% RH non-condensing
CO & gas alarm WGC-01AC 100-230 V 50/60 Hz or 5 V DC USB Type-C; built-in 3.7 V 300 mAh rechargeable lithium battery
WGC-01 measuring rangeCO 0-999 ppm +/-10%, alarm at 51 ppm; natural gas Lv1-Lv4, Lv4 = 15% LEL, alarm at 25% LEL
WGC-01 environmentHumidity 0%-95% RH +/-5%; temperature -10 C to 50 C +/-1.5 C
Approval disciplineCertificate scope is confirmed per exact SKU; any housing or firmware change is assessed with the certification body
Model-specific catalog noteCO 0-999ppm; temp/humidity; rechargeable Li

Printed Catalog Page

The specification table for this product family is printed in the 2026 catalog on page 32. Open the page at full size to read every parameter.

Overview

WGC-01 - 2026 multifunctional CO and natural-gas alarm on catalog page 32: AC 100-230 V 50/60 Hz or 5 V DC via USB Type-C, built-in 3.7 V 300 mAh rechargeable cell, CO range 0-999 ppm with +/-10% accuracy and a 51 ppm alarm threshold, natural gas Lv1-Lv4 with Lv4 at 15% LEL, humidity 0%-95% RH +/-5% and temperature -10 C to 50 C +/-1.5 C; the printed device also monitors temperature and humidity and reports power failure.

Best fit (recommended): Recommended for a kitchen or boiler-room range where one wall device has to cover CO, natural gas, ambient conditions and mains-loss alerting; request the current certificate scope before a first order because this is a life-safety SKU.

Built in a 10,000 m2 facility with 500+ staff and roughly 100,000 units of monthly capacity across the portfolio. Industrial design, electronics, firmware, tooling, SMT, assembly and functional test are performed in-house, so a change to the enclosure, the firmware identity or the packaging is handled by the same team that will run volume production. For dimensions, mechanical drawings and the model-specific certificate scope, request the datasheet.

Key Characteristics

Life-safety approvals scope stated per exact SKU

EN 14604 applicability confirmed for the smoke alarm line

Any housing or firmware change assessed with the certification body

IQC on incoming sensor lots

Buyer and third-party audits welcome

Commercial & Delivery Reference

Model / SKUWGC-01
Product nameMultifunctional CO & Natural Gas Alarm
Product line / categorySmart Security / Smoke, CO & Gas Detectors
2026 catalog referenceP32
Range status2026 new release
Compliance fileModel-specific Declaration of Conformity and test report references supplied on request.
SamplesExisting-platform samples are typically prepared within 5-7 working days.
Tooling & NREAgreed in writing at scoping; customer-funded tooling ownership is not assumed by the factory.

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.