FS01D Driveway Alert Doorbell product photo
Product photos · OEM/ODM variants available
Driveway Alert FS Series · Smart Doorbells

Driveway Alert FS Series - Full Series

The FS series is our motion-activated driveway alert line: a weatherproof sensor at the driveway or gate sends a wireless signal to an indoor receiver when a vehicle or person passes. The range covers simple 16 ft / 60-degree motion sensors, solar-powered variants and long-range kits up to a quarter mile, so a buyer can build a complete driveway-alert ladder from one platform.

6 modelsFactory directSamples available

Shared Platform Specification

All 6 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.

Product familyDriveway sensor kits, entry chimes and welcome alerts
Driveway sensor FS01DMotion activated, 16 ft / 60 degree detection
Long-range variantsFS05D / FS06D / FS07D PLUS receiver families; FS06D has a 4-channel display; FS07D PLUS adds solar and 1/4 mile range
Entry alert M1 / M2 / K1 / K2M1 / M2 magnetic contact type; K1 / K2 PIR motion type; automatically rings on entry
Entry alert performanceUp to 16 ft / 110 degrees, 500 ft operating range, 58 ringtones, eye-catching indicators
EngineeringSensor optics, RF link, receiver firmware and enclosure tooling developed in-house
OEM optionsReceiver styling, chime sounds, sensor housing, logo, packaging and kit composition

Model Differences

The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.

ModelWhat differsSource
FS01DMotion sensor, 16 ft / 60-degree detection zone2026 catalog
FS03DSolar-panel-powered variant of the FS motion sensor2026 catalog
FS06D4-channel display receiver variant2026 catalog
FS07DPLUS (web ref. FS06D)Solar-powered, long-range variant up to 1/4 mile2026 catalog
FS02DMotion-sensor variant; shared FS platform2026 catalog
FS05DLong-range alert variant; shared FS platform2026 catalog

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

FS01D

Positioning: The entry motion-sensor kit in the FS line, specified at 16 ft and a 60-degree detection zone.

Best fit (recommended): Recommended as the lead SKU for a driveway-alert range: the defined 16 ft / 60-degree detection pattern makes it easy to explain to a buyer what will trigger the alert, and it suits a standard suburban driveway.

FS03D

Positioning: The solar-powered variant, for installations where changing sensor batteries is impractical.

Best fit (recommended): Recommended where the sensor mounts at a remote gate or long driveway and the buyer wants to avoid routine battery changes; position it as the maintenance-light step up from FS01D.

FS06D

Positioning: The multi-zone variant with a 4-channel receiver display, for monitoring several approach points.

Best fit (recommended): Recommended for larger properties where the buyer wants to see which of four sensors or approach zones triggered - a farm entrance, a long lane or a property with several gates.

FS07DPLUS (web ref. FS06D)

Positioning: The top long-range solar kit, rated to a quarter mile, for the widest property coverage.

Best fit (recommended): Recommended as the flagship of the FS line for rural and acreage channels: solar power removes battery maintenance at a distant sensor, and the quarter-mile link covers a long approach to the house.

Further FS variants (FS02D / FS05D)

In the Driveway Alert FS Series range, Further FS variants (FS02D / FS05D) are handled as one group. The FS series is our motion-activated driveway alert line: a weatherproof sensor at the driveway or gate sends a wireless signal to an indoor receiver when a vehicle or person passes. The range covers simple 16 ft / 60-degree motion sensors, solar-powered variants and long-range kits up to a quarter mile, so a buyer can build a complete driveway-alert ladder from one platform. These models are grouped because the printed sources do not state a per-model electrical difference for them; writing a separate positioning for each would invent a difference that does not exist. Request samples to compare the exact appearance before committing to a SKU.

Key Characteristics

Sensor optics, RF link and receiver firmware designed in-house

Doorbell-class receiver with configurable chime set and entry-alert behaviour

Configurable receiver styling, range tier and kit composition

Weatherproof sensor housing options

Samples for on-site range and false-trigger testing

Model-specific CE / FCC / RoHS / UKCA file

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.