Shared Platform Specification
All 4 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.
| Product family | Driveway sensor kits, entry chimes and welcome alerts |
|---|---|
| Driveway sensor FS01D | Motion activated, 16 ft / 60 degree detection |
| Long-range variants | FS05D / FS06D / FS07D PLUS receiver families; FS06D has a 4-channel display; FS07D PLUS adds solar and 1/4 mile range |
| Entry alert M1 / M2 / K1 / K2 | M1 / M2 magnetic contact type; K1 / K2 PIR motion type; automatically rings on entry |
| Entry alert performance | Up to 16 ft / 110 degrees, 500 ft operating range, 58 ringtones, eye-catching indicators |
| Engineering | Sensor optics, RF link, receiver firmware and enclosure tooling developed in-house |
| OEM options | Receiver styling, chime sounds, sensor housing, logo, packaging and kit composition |
Model Differences
The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.
| Model | What differs | Source |
|---|---|---|
| M1 (web ref. K9) | Magnetic door/window contact sensor type | 2026 catalog |
| K1 | PIR motion-sensor type | 2026 catalog |
| M2 (web ref. K5) | Magnetic contact variant; shared M platform | 2026 catalog |
| K2 | PIR motion variant; shared K platform | 2026 catalog |
Model-by-Model Guide
Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.
M1 (web ref. K9)
Positioning: The magnetic-contact entry alert, for detecting the open/close of a door or gate.
Best fit (recommended): Recommended where the buyer wants to know that a specific door or gate was opened - a back door, shed or garden gate - because a magnetic contact gives a clean, unambiguous open/close event.
K1
Positioning: The PIR-motion entry alert, for detecting movement along a path or approach.
Best fit (recommended): Recommended where the buyer wants an alert as someone approaches, rather than only when a door opens - a front path, hallway or driveway edge - since a PIR sees movement before the door is reached.
Further entry-alert variants (M2 / K2)
In the Entry Alert M / K Series range, Further entry-alert variants (M2 / K2) are handled as one group. The M and K entry-alert lines signal when a door, gate or path is used. The M series uses a magnetic door/window contact sensor, while the K series uses a PIR motion sensor - two different sensing methods for two different installation problems - paired with an indoor chime receiver. These models are grouped because the printed sources do not state a per-model electrical difference for them; writing a separate positioning for each would invent a difference that does not exist. Request samples to compare the exact appearance before committing to a SKU.
Key Characteristics
Sensor optics, RF link and receiver firmware designed in-house
Doorbell-class receiver with configurable chime set and entry-alert behaviour
Configurable receiver styling, range tier and kit composition
Weatherproof sensor housing options
Samples for on-site range and false-trigger testing
Model-specific CE / FCC / RoHS / UKCA file
Applications
- Rural and farm retail
- Driveway and gate monitoring
- Small business entry chimes
- Property and outbuilding security
OEM / ODM Options
- Housing / faceplate / colourway
- Logo, artwork and retail packaging
- Plug standard and regional configuration
- Firmware identity, chime or alert behaviour
- Bundle / kit composition
- Documentation and multi-language inserts
Downloads & Next Steps
Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.
Frequently Asked Questions
What is the minimum order quantity?
MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.
Can we request samples?
Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.
Do you accept factory audits?
Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.
Will you sign an NDA?
Yes, before drawings or commercial details are exchanged.
Who owns the tooling?
Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

