F5-ZWJ Pro Eco-friendly Kinetic Doorbell product photo
Product photos · OEM/ODM variants available
Kinetic Doorbell Series · Smart Doorbells

Kinetic Doorbell Series - Full Series

A kinetic doorbell generates the energy for its transmission from the press of the button itself - no battery at the door, no wiring and no maintenance call. Our kinetic family covers several transmitter and receiver configurations for different retrofit styles, all built on a self-powered push: up to 500 ft in open space, IP44 protection, 58 melodies with 5 volume levels (0-110 dB), an extra-strong wall-penetrating signal, learning code, smart memory and expandable pairing, with CE / FCC / RoHS approval.

6 modelsFactory directSamples available

Shared Platform Specification

All 6 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.

PowerSelf-powered kinetic push - no batteries required, maintenance free
Wireless rangeUp to 500 ft in open space
Waterproof rateIP44
Melodies58 high quality tunes, 5 volume levels (0-110 dB)
SignalExtra strong wall-penetrating signal
CertificationCE / FCC / RoHS approved
FeaturesEye-catching indicators, learning code, smart memory, expandable

Model Differences

The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.

ModelWhat differsSource
F5-ZWJ Pro (web ref. FX-LM)Kinetic transmitter configuration F5-ZWJ Pro; self-powered, 500 ft, IP442026 catalog
D1 Pro (web ref. D1WE)Kinetic transmitter configuration D1 Pro; shared kinetic platform2026 catalog
D2 Pro (web ref. D1WE)Kinetic transmitter configuration D2 Pro; shared kinetic platform2026 catalog
B5YD-P60Kinetic transmitter configuration B5YD-P60; shared kinetic platform2026 catalog
B9YD-P55Kinetic transmitter configuration B9YD-P55; shared kinetic platform2026 catalog
B12YD-P30Kinetic transmitter configuration B12YD-P30; shared kinetic platform2026 catalog

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

F5-ZWJ Pro (web ref. FX-LM)

Positioning: The published reference kinetic configuration, printed in the 2026 catalog with the full self-powered specification.

Best fit (recommended): Recommended as the lead kinetic SKU for a European retrofit or sustainability-led range: a no-battery, no-wiring door push is the core selling story, and the 500 ft reach plus IP44 rating covers a typical house entrance.

Further kinetic configurations (D1 Pro / D2 Pro / B5YD-P60 / B9YD-P55 / B12YD-P30)

In the Kinetic Doorbell Series range, Further kinetic configurations (D1 Pro / D2 Pro / B5YD-P60 / B9YD-P55 / B12YD-P30) are handled as one group. A kinetic doorbell generates the energy for its transmission from the press of the button itself - no battery at the door, no wiring and no maintenance call. Our kinetic family covers several transmitter and receiver configurations for different retrofit styles, all built on a self-powered push: up to 500 ft in open space, IP44 protection, 58 melodies with 5 volume levels (0-110 dB), an extra-strong wall-penetrating signal, learning code, smart memory and expandable pairing, with CE / FCC / RoHS approval. These models are grouped because the printed sources do not state a per-model electrical difference for them; writing a separate positioning for each would invent a difference that does not exist. Request samples to compare the exact appearance before committing to a SKU.

Key Characteristics

Battery-free transmitter powered by the button press

Generator, RF burst and receiver sensitivity tuned together

Configurable transmitter shape and button finish

Custom receiver styling and kit composition

CE / RED and RoHS file per configuration

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.