SH-18-1-TY Smart Outdoor Switch product photo
Product photos · OEM/ODM variants available
SH-18 Smart Outdoor Switch Series · Smart Home

SH-18 Smart Outdoor Switch Series - Full Series

The SH-18 is our established smart outdoor switch - a rain-tight, Wi-Fi / BLE / Zigbee controller for garden, patio and exterior equipment, with Tuya Smart / Smart Life control, voice assistants and Matter compatibility. The US configuration is rated 15 A AC 125 V (max 1875 W) and carries ETL / FCC / RoHS; regional variants follow the same core with local certification. The -1 / -3 / -4 suffixes denote connectivity and configuration options on one hardware platform.

3 modelsFactory directSamples available

Shared Platform Specification

All 3 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.

US input15 A AC 125 V, 50/60 Hz (SH-18-1-TY)
US output15 A resistive 125 V, max 1875 W
EU / UK input13 A / 16 A / 10 A AC 240 V, 50/60 Hz depending on model
EU / UK outputUp to 16 A resistive 240 V, max 3840 W
ConnectivityWi-Fi / BLE / Zigbee
App & voiceTuya Smart / Smart Life; Apple Home, Google Home, Amazon Alexa, SmartThings, Matter
CertificationETL / FCC / RoHS (US); CE / RoHS (EU, UK)
Outdoor designRain-tight tested; overload and surge protection; 2 sockets on SH-30 / SH-26 series
FunctionsTimer, countdown, independent socket control, flexible schedule
Operating environment-20 C to 55 C, relative humidity 10%-90%

Model Differences

The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.

ModelWhat differsSource
SH-18-1-TY (web ref. SH-18)Base SH-18 configuration, 15 A / 125 V, ETL / FCC / RoHS2026 catalog
SH-18-3-TY (web ref. SH-18)SH-18 configuration with Wi-Fi / BLE / Zigbee connectivity2026 catalog
SH-18-4-TY (web ref. SH-18)SH-18 configuration; shared outdoor platform2026 catalog

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

SH-18-1-TY (web ref. SH-18)

Positioning: The published reference SH-18 configuration, printed with the full 15 A / 1875 W and ETL specification.

Best fit (recommended): Recommended as the lead outdoor SKU for a North American smart-home range: the 15 A rating and ETL listing cover pumps, landscape lighting and pool equipment, and the rain-tight housing addresses the outdoor failure mode buyers worry about.

Further SH-18 configurations (SH-18-3-TY / SH-18-4-TY)

In the SH-18 Smart Outdoor Switch Series range, Further SH-18 configurations (SH-18-3-TY / SH-18-4-TY) are handled as one group. The SH-18 is our established smart outdoor switch - a rain-tight, Wi-Fi / BLE / Zigbee controller for garden, patio and exterior equipment, with Tuya Smart / Smart Life control, voice assistants and Matter compatibility. The US configuration is rated 15 A AC 125 V (max 1875 W) and carries ETL / FCC / RoHS; regional variants follow the same core with local certification. The -1 / -3 / -4 suffixes denote connectivity and configuration options on one hardware platform. These models are grouped because the printed sources do not state a per-model electrical difference for them; writing a separate positioning for each would invent a difference that does not exist. Request samples to compare the exact appearance before committing to a SKU.

Key Characteristics

Outdoor enclosure with sealing decision controlled in-house

Cable entry, gasket and PCB protection validated as a system

Custom housing, radio configuration and branding

Pre-compliance RF and safety checks before lab submission

Samples available for on-site installation testing

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.