Technical Specifications
Configuration targets for an ODM programme, not measured production data. Values marked 'target' are set at scoping; tooling, approvals and availability are confirmed in writing.
| Status | ODM flagship configuration - feasibility and tooling confirmed at scoping |
|---|---|
| Configuration | Complete Wi-Fi water level alarm: high / low level detection, app push alerts and an alarm-activated outlet that starts a connected pump automatically |
| Detection | High water level and low water level modes, selectable at installation (target) |
| Alerts | Audible alarm, LED indication, in-app event log and free push notifications to paired phones (target) |
| Outlet | Mains-rated switched outlet; rating and plug standard per target market (confirm at scoping) |
| Operating note | Automatic pump control applies in outlet-powered mode only; the pump's own switch must be on |
| Alarm volume | 110 dB (target) |
| Enclosure | IP65 weatherproof housing (target) |
| Backup battery | Built-in rechargeable cell (target) |
| Float lead | 10 ft / 3 m tethered float (target) |
| App sharing | Multiple paired users per installation (target) |
| Connectivity | Wi-Fi 2.4 GHz with app push alert (target) |
| Platform | One validated Wi-Fi alarm unit offered in six configurations; one in current production, five defined for ODM programmes |
| Detection | High water level and low water level modes, selectable at installation |
| Zones | 2 independent zones on the baseline platform |
| Alarm behaviour | Audible alarm, LED indication and app push notification when a high or low level is triggered |
| Connectivity | Wi-Fi 2.4 GHz with app push alerts; optional SMS, email or phone escalation configurable at ODM stage |
| Applications | Groundwater bilge pumps, water tanks, sewage tanks, septic pumps, grinder pits, low-density oils, swimming pools, ponds |
| Platform ODM options | Built-in backup battery, dual-float expansion, 110 dB high-output version with strobe indication, alarm-activated outlet for automatic pump control, extended 5 m float lead, configurable alarm volume and app stack |
| Approval discipline | Outlet rating, radio approval, enclosure sealing and float cable length are confirmed per configuration and per target market in writing at scoping |
| Model-specific catalog note | Flagship platform configuration; free app push alerts; high and low water level detection; alarm-activated outlet starts a connected pump automatically; built-in backup battery; 110 dB; IP65; outlet rating confirmed per market at scoping |
Overview
The WLA-Outlet is part of our Sump Pump Alarms line within Smart Security. It is built in a 10,000 m2 facility with 500+ staff and roughly 100,000 units of monthly capacity across the portfolio. Industrial design, electronics, firmware, tooling, SMT, assembly and functional test are performed in-house, so a change to the enclosure, the firmware identity or the packaging is handled by the same team that will run volume production.
This page is the online reference for the model. For dimensions, mechanical drawings and the model-specific certificate scope, request the datasheet - we supply the document set that actually applies to the SKU you intend to buy rather than a generic family certificate.
Key Characteristics
High / low water level float monitoring with a WiFi 2.4 G alert unit
Alarm-activated outlet and backup-battery options configurable at scoping
IP67 probe enclosure and configurable cable length
Custom audible level, app identity, housing and retail packaging
Samples recommended for sump-pit validation
Commercial & Delivery Reference
| Model / SKU | WLA-Outlet |
|---|---|
| Product name | WiFi Sump Pump Alarm with App Alerts and Pump Control Outlet |
| Product line / category | Smart Security / Sump Pump Alarms |
| 2026 catalog reference | ODM configuration - not in the printed catalog |
| Configuration status | ODM development item on the WLA platform. Tooling, approvals and availability are confirmed in writing at scoping; not a stocked SKU. |
| Range status | ODM configuration |
| Compliance file | Model-specific Declaration of Conformity and test report references supplied on request. |
| Samples | Tooling-dependent; sample plan and timing are quoted at scoping. |
| Tooling & NRE | Agreed in writing at scoping; customer-funded tooling ownership is not assumed by the factory. |
Applications
- Basement and sump pit protection
- Septic and sewage pump monitoring
- Pond, tank and water-level management
- Plumbing and property maintenance channels
OEM / ODM Options
- Housing / faceplate / colourway
- Logo, artwork and retail packaging
- Plug standard and regional configuration
- Firmware identity, chime or alert behaviour
- Bundle / kit composition
- Documentation and multi-language inserts
Downloads & Next Steps
Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.
Frequently Asked Questions
What is the minimum order quantity?
MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.
Can we request samples?
Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.
Do you accept factory audits?
Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.
Will you sign an NDA?
Yes, before drawings or commercial details are exchanged.
Who owns the tooling?
Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.




