WLA-Z2-WiFi WiFi Sump Pump Alarm with Float Switch product photo
Product photos · OEM/ODM variants available
WLA-Z2-WiFi · Smart Security

WLA-Z2-WiFi - WiFi Sump Pump Alarm with Float Switch

WiFi Sump Pump Alarm with Float Switch from the Sump Pump Alarms range, manufactured by Shenzhen Shenan Yangguang Electronics Co., Ltd. in our owned Shenzhen facility. Available for OEM/ODM programmes with configurable housing, firmware identity, packaging and regional approvals.

Catalog P36Factory direct2026 NEWSamples available

Technical Specifications

Transcribed from the 2026 printed catalog. Model-specific parameters are listed first, followed by the Sump Pump Alarms family-wide rows; confirm the exact parameter set and certificate scope in the datasheet before ordering.

StatusCurrent production platform (2026 catalog, printed page 36)
Power supplyDC 5 V Type-C port
Working current< 200 mA
Max. alarm volume90 dB
Waterproof level of float switchIP67
ConnectivityWi-Fi 2.4 G b/n/g
Number of zones2
UsageSeptic Alarm, High/Low Water Alarm, Sump Pump Alarm
BehaviourMonitors water level and raises an audible and visual alarm with an app notification when a high or low level occurs
PlatformOne validated Wi-Fi alarm unit offered in six configurations; one in current production, five defined for ODM programmes
DetectionHigh water level and low water level modes, selectable at installation
Zones2 independent zones on the baseline platform
Alarm behaviourAudible alarm, LED indication and app push notification when a high or low level is triggered
ConnectivityWi-Fi 2.4 GHz with app push alerts; optional SMS, email or phone escalation configurable at ODM stage
ApplicationsGroundwater bilge pumps, water tanks, sewage tanks, septic pumps, grinder pits, low-density oils, swimming pools, ponds
Platform ODM optionsBuilt-in backup battery, dual-float expansion, 110 dB high-output version with strobe indication, alarm-activated outlet for automatic pump control, extended 5 m float lead, configurable alarm volume and app stack
Approval disciplineOutlet rating, radio approval, enclosure sealing and float cable length are confirmed per configuration and per target market in writing at scoping
Model-specific catalog noteDC5V Type-C; <200mA; 90dB; IP67 float switch; WiFi 2.4G b/n/g; 2 zones; high & low water level; app push alert; current production platform

Printed Catalog Page

The specification table for this product family is printed in the 2026 catalog on page 36. Open the page at full size to read every parameter.

Overview

The WLA-Z2-WiFi is part of our Sump Pump Alarms line within Smart Security. It is built in a 10,000 m2 facility with 500+ staff and roughly 100,000 units of monthly capacity across the portfolio. Industrial design, electronics, firmware, tooling, SMT, assembly and functional test are performed in-house, so a change to the enclosure, the firmware identity or the packaging is handled by the same team that will run volume production.

This page is the online reference for the model. For dimensions, mechanical drawings and the model-specific certificate scope, request the datasheet - we supply the document set that actually applies to the SKU you intend to buy rather than a generic family certificate.

Key Characteristics

High / low water level float monitoring with a WiFi 2.4 G alert unit

Alarm-activated outlet and backup-battery options configurable at scoping

IP67 probe enclosure and configurable cable length

Custom audible level, app identity, housing and retail packaging

Samples recommended for sump-pit validation

Commercial & Delivery Reference

Model / SKUWLA-Z2-WiFi
Product nameWiFi Sump Pump Alarm with Float Switch
Product line / categorySmart Security / Sump Pump Alarms
2026 catalog referenceP36
Website reference modelWS01 (online listing code used for photo matching)
Range status2026 new release
Compliance fileModel-specific Declaration of Conformity and test report references supplied on request.
SamplesExisting-platform samples are typically prepared within 5-7 working days.
Tooling & NREAgreed in writing at scoping; customer-funded tooling ownership is not assumed by the factory.

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.