SA-1168-WS03 Indoor Strobe Siren product photo
Product photos · OEM/ODM variants available
T-Series Strobe Sirens (Indoor & Solar) · Smart Security

T-Series Strobe Sirens (Indoor & Solar) - Full Series

Catalog page 25 prints two audible-and-visual warning devices next to the T10 / T11 / T30 hub family: an indoor strobe siren with a red dome and a solar strobe siren with a black solar panel. The two are separated by installation environment - inside a building versus a sunlit outdoor position - not by a published decibel comparison.

2 modelsFactory directHub accessories

Shared Platform Specification

Both models are printed as strobe sirens in the alarm-hub accessory family. Sound level, battery and RF figures are not printed per model on catalog page 25.

Product familyDoor/window contacts, standalone door alarms, PIR motion detectors, strobe sirens, doorbell push buttons, SOS buttons and 4-button remotes
Hub compatibilityWireless alarm accessories pair with the T10 / T11 / T30 WiFi alarm hub; W1 / W5 / W6 and HP03W are standalone Wi-Fi devices that need no hub
Engineering scopeMagnet tolerance, lens geometry, RF behaviour, standby current and battery life are validated together as one system
OEM / ODM optionsHousing, colourway, modular face cover, logo, radio configuration, multipack packaging and kit composition
DocumentationModel-specific electrical parameters, the pairing matrix and certificate scope are supplied in the datasheet before ordering

Model Differences

One is printed as an Indoor Strobe Siren and one as a Solar Strobe Siren; the solar model shows a panel on the front. The distinction is the power / installation story, not a claimed difference in output.

ModelWhat differsSource
SA-1168-WS03Indoor strobe siren - red dome on a white base2026 catalog p25
SA-1168-SW01Solar strobe siren - black solar panel on the front2026 catalog p25

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

SA-1168-WS03

Positioning: The indoor warning device: a red lens on a white base for an audible and visual alarm inside the building.

Best fit (recommended): Recommended for the indoor portion of a kit - hallway, landing or utility room - where a visual signal matters as much as the siren.

SA-1168-SW01

Positioning: The outdoor warning device: a front solar panel is printed on the housing, so the story is sunlight-assisted placement rather than an indoor plug position.

Best fit (recommended): Recommended for a gate, shed or rear entrance where running power is impractical; confirm the solar charging and backup behaviour in the datasheet before specifying a site.

Key Characteristics

Door/window contacts, PIR motion sensors, sirens, push buttons, SOS buttons and remotes in one compatible accessory family

Magnet tolerance, RF behaviour and battery life engineered together

Modular face-cover and colourway options on the W1 / W5 / W6 contacts

Pairing matrix with T10 / T11 / T30 hubs confirmed in writing

Samples recommended for on-site range and compatibility testing

100% per-unit functional test

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.