Shared Platform Specification
Shared printed function: intruder, visitor or pet detection for the T10 / T11 / T30 hub platform. Detection angle, range and battery data are not printed per model on catalog page 25.
| Product family | Door/window contacts, standalone door alarms, PIR motion detectors, strobe sirens, doorbell push buttons, SOS buttons and 4-button remotes |
|---|---|
| Hub compatibility | Wireless alarm accessories pair with the T10 / T11 / T30 WiFi alarm hub; W1 / W5 / W6 and HP03W are standalone Wi-Fi devices that need no hub |
| Engineering scope | Magnet tolerance, lens geometry, RF behaviour, standby current and battery life are validated together as one system |
| OEM / ODM options | Housing, colourway, modular face cover, logo, radio configuration, multipack packaging and kit composition |
| Documentation | Model-specific electrical parameters, the pairing matrix and certificate scope are supplied in the datasheet before ordering |
Model Differences
The five PIR accessories differ by the lens and housing form printed on catalog page 25. No per-model detection specification is printed there, so none is claimed here.
| Model | What differs | Source |
|---|---|---|
| SA-1168-HP03 (web ref. HP03W) | Square white housing with a central round lens | 2026 catalog p25 |
| SA-1168-HP04 (web ref. HP03W) | Tall narrow rectangular housing with offset lens | 2026 catalog p25 |
| SA-IR08 (web ref. HP03W) | Rounded housing with protruding lens and curved body | 2026 catalog p25 |
| SA-IR07-NWX02 (web ref. HP03W) | Rectangular housing with a blue vertical lens strip | 2026 catalog p25 |
| SA-IR07-NWX03 (web ref. HP03W) | Stacked cylindrical housing with a top lens | 2026 catalog p25 |
Model-by-Model Guide
Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.
SA-1168-HP03 (web ref. HP03W)
Positioning: A compact square body with a centred lens - the most neutral PIR form in the accessory range.
Best fit (recommended): Recommended for a hallway or living-room kit where the detector should blend into a white interior; confirm the detection cone on a sample before fixing the mounting height.
SA-1168-HP04 (web ref. HP03W)
Positioning: A tall, narrow PIR body that reads as a window-side rather than a wall-centre device.
Best fit (recommended): Recommended for corridor and doorway monitoring where a slim footprint is easier to place; use it alongside a contact sensor on the same door for a two-zone entry story.
SA-IR08 (web ref. HP03W)
Positioning: The rounded, protruding-lens form - the most visually distinct PIR in the p25 line.
Best fit (recommended): Recommended where a detector has to cover a corner: the curved body is easy to aim toward a room junction, subject to on-site range testing.
SA-IR07-NWX02 (web ref. HP03W)
Positioning: A rectangular body with a tall blue lens strip, which makes the sensing area obvious at a glance.
Best fit (recommended): Recommended for installer channels - the visible lens strip helps a technician show the customer where the detector is looking during setup.
SA-IR07-NWX03 (web ref. HP03W)
Positioning: A stacked cylindrical form with the lens at the top, the most compact footprint of the five.
Best fit (recommended): Recommended for shelf or mantel placement in a small flat, where a wall-mounted square PIR would be visually intrusive; verify the mounting orientation on a sample.
Key Characteristics
Door/window contacts, PIR motion sensors, sirens, push buttons, SOS buttons and remotes in one compatible accessory family
Magnet tolerance, RF behaviour and battery life engineered together
Modular face-cover and colourway options on the W1 / W5 / W6 contacts
Pairing matrix with T10 / T11 / T30 hubs confirmed in writing
Samples recommended for on-site range and compatibility testing
100% per-unit functional test
Applications
- Alarm system accessory bundles
- Smart-home starter kits
- Property entry monitoring
- Retail multipacks and caregiver alert kits
OEM / ODM Options
- Housing / faceplate / colourway
- Logo, artwork and retail packaging
- Plug standard and regional configuration
- Firmware identity, chime or alert behaviour
- Bundle / kit composition
- Documentation and multi-language inserts
Downloads & Next Steps
Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.
Frequently Asked Questions
What is the minimum order quantity?
MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.
Can we request samples?
Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.
Do you accept factory audits?
Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.
Will you sign an NDA?
Yes, before drawings or commercial details are exchanged.
Who owns the tooling?
Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.






