SA-1168-HP03 Wireless Motion Sensor (PIR) product photo
Product photos · OEM/ODM variants available
Hub-Paired PIR Motion Sensors (SA-1168 / SA-IR) · Smart Security

Hub-Paired PIR Motion Sensors (SA-1168 / SA-IR) - Full Series

Catalog page 25 lists five motion sensors under the single function 'detect intruders, visitors, or pets in your property'. They are wireless accessories for the T10 / T11 / T30 hub platform. The catalog prints five different housing forms but no per-model detection angle, range or electrical table on this page; those figures are supplied in the model datasheet.

5 modelsFactory directHub accessories

Shared Platform Specification

Shared printed function: intruder, visitor or pet detection for the T10 / T11 / T30 hub platform. Detection angle, range and battery data are not printed per model on catalog page 25.

Product familyDoor/window contacts, standalone door alarms, PIR motion detectors, strobe sirens, doorbell push buttons, SOS buttons and 4-button remotes
Hub compatibilityWireless alarm accessories pair with the T10 / T11 / T30 WiFi alarm hub; W1 / W5 / W6 and HP03W are standalone Wi-Fi devices that need no hub
Engineering scopeMagnet tolerance, lens geometry, RF behaviour, standby current and battery life are validated together as one system
OEM / ODM optionsHousing, colourway, modular face cover, logo, radio configuration, multipack packaging and kit composition
DocumentationModel-specific electrical parameters, the pairing matrix and certificate scope are supplied in the datasheet before ordering

Model Differences

The five PIR accessories differ by the lens and housing form printed on catalog page 25. No per-model detection specification is printed there, so none is claimed here.

ModelWhat differsSource
SA-1168-HP03 (web ref. HP03W)Square white housing with a central round lens2026 catalog p25
SA-1168-HP04 (web ref. HP03W)Tall narrow rectangular housing with offset lens2026 catalog p25
SA-IR08 (web ref. HP03W)Rounded housing with protruding lens and curved body2026 catalog p25
SA-IR07-NWX02 (web ref. HP03W)Rectangular housing with a blue vertical lens strip2026 catalog p25
SA-IR07-NWX03 (web ref. HP03W)Stacked cylindrical housing with a top lens2026 catalog p25

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

SA-1168-HP03 (web ref. HP03W)

Positioning: A compact square body with a centred lens - the most neutral PIR form in the accessory range.

Best fit (recommended): Recommended for a hallway or living-room kit where the detector should blend into a white interior; confirm the detection cone on a sample before fixing the mounting height.

SA-1168-HP04 (web ref. HP03W)

Positioning: A tall, narrow PIR body that reads as a window-side rather than a wall-centre device.

Best fit (recommended): Recommended for corridor and doorway monitoring where a slim footprint is easier to place; use it alongside a contact sensor on the same door for a two-zone entry story.

SA-IR08 (web ref. HP03W)

Positioning: The rounded, protruding-lens form - the most visually distinct PIR in the p25 line.

Best fit (recommended): Recommended where a detector has to cover a corner: the curved body is easy to aim toward a room junction, subject to on-site range testing.

SA-IR07-NWX02 (web ref. HP03W)

Positioning: A rectangular body with a tall blue lens strip, which makes the sensing area obvious at a glance.

Best fit (recommended): Recommended for installer channels - the visible lens strip helps a technician show the customer where the detector is looking during setup.

SA-IR07-NWX03 (web ref. HP03W)

Positioning: A stacked cylindrical form with the lens at the top, the most compact footprint of the five.

Best fit (recommended): Recommended for shelf or mantel placement in a small flat, where a wall-mounted square PIR would be visually intrusive; verify the mounting orientation on a sample.

Key Characteristics

Door/window contacts, PIR motion sensors, sirens, push buttons, SOS buttons and remotes in one compatible accessory family

Magnet tolerance, RF behaviour and battery life engineered together

Modular face-cover and colourway options on the W1 / W5 / W6 contacts

Pairing matrix with T10 / T11 / T30 hubs confirmed in writing

Samples recommended for on-site range and compatibility testing

100% per-unit functional test

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.