Shared Platform Specification
Shared printed specification: DC 3 V, 2 x AAA; working consumption < 30 uA; 120 dB maximum alarm volume; IP20; -20 C to 55 C, RH 10%-90%; wireless, compact and easy to install.
| Product family | Door/window contacts, standalone door alarms, PIR motion detectors, strobe sirens, doorbell push buttons, SOS buttons and 4-button remotes |
|---|---|
| Hub compatibility | Wireless alarm accessories pair with the T10 / T11 / T30 WiFi alarm hub; W1 / W5 / W6 and HP03W are standalone Wi-Fi devices that need no hub |
| Engineering scope | Magnet tolerance, lens geometry, RF behaviour, standby current and battery life are validated together as one system |
| OEM / ODM options | Housing, colourway, modular face cover, logo, radio configuration, multipack packaging and kit composition |
| Documentation | Model-specific electrical parameters, the pairing matrix and certificate scope are supplied in the datasheet before ordering |
Model Differences
S1-D prints four modes (1-minute alarm, opening alarm, doorbell, opening reminder). S2-D prints five modes and adds a delay-reminder mode. This is a function difference, not a claimed difference in volume or electronics.
| Model | What differs | Source |
|---|---|---|
| S1-D (web ref. FX-S1-R) | 4 working modes: 1-minute alarm, opening alarm, doorbell, opening reminder | 2026 catalog p37 |
| S2-D (web ref. FX-S1-R) | 5 working modes - adds delay reminder and a different mode order with doorbell | 2026 catalog p37 |
Model-by-Model Guide
Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.
S1-D (web ref. FX-S1-R)
Positioning: The four-mode standalone alarm - the simpler of the two for a buyer who only needs intrusion alerting and an opening reminder.
Best fit (recommended): Recommended for a basic retail safety pack on a front door or a fridge cabinet, where a short one-minute alarm is less likely to annoy neighbours.
S2-D (web ref. FX-S1-R)
Positioning: The five-mode version, adding a delay reminder for users who want a grace period before the alarm sounds.
Best fit (recommended): Recommended for a family entrance where one member needs time to disarm; the delay-reminder mode is the specific reason to step up from S1-D.
Key Characteristics
Door/window contacts, PIR motion sensors, sirens, push buttons, SOS buttons and remotes in one compatible accessory family
Magnet tolerance, RF behaviour and battery life engineered together
Modular face-cover and colourway options on the W1 / W5 / W6 contacts
Pairing matrix with T10 / T11 / T30 hubs confirmed in writing
Samples recommended for on-site range and compatibility testing
100% per-unit functional test
Applications
- Alarm system accessory bundles
- Smart-home starter kits
- Property entry monitoring
- Retail multipacks and caregiver alert kits
OEM / ODM Options
- Housing / faceplate / colourway
- Logo, artwork and retail packaging
- Plug standard and regional configuration
- Firmware identity, chime or alert behaviour
- Bundle / kit composition
- Documentation and multi-language inserts
Downloads & Next Steps
Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.
Frequently Asked Questions
What is the minimum order quantity?
MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.
Can we request samples?
Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.
Do you accept factory audits?
Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.
Will you sign an NDA?
Yes, before drawings or commercial details are exchanged.
Who owns the tooling?
Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.






