HP03W Smart Motion Sensor product photo
Product photos · OEM/ODM variants available
Wi-Fi Smart Motion Sensors (HP03W / IR08-W1) · Smart Security

Wi-Fi Smart Motion Sensors (HP03W / IR08-W1) - Full Series

HP03W and IR08-W1 are the two standalone Wi-Fi motion sensors on catalog page 27. The page prints one parameter table for both: DC 3 V, working current below 150 mA, standby below 50 uA, Wi-Fi 2.4 G b/n/g, a 90 degree detection angle, a 4 m detection range and operation from -20 C to 55 C at 10%-90% RH. The catalog separates them by housing form - a rounded square for HP03W and a round body for IR08-W1.

2 modelsFactory directNo hub required

Shared Platform Specification

Shared printed table: DC 3 V; < 150 mA working; < 50 uA standby; Wi-Fi 2.4 G b/n/g; 90 degree detection angle; 4 m detection range; -20 C to 55 C, RH 10%-90%; no hub required.

Product familyDoor/window contacts, standalone door alarms, PIR motion detectors, strobe sirens, doorbell push buttons, SOS buttons and 4-button remotes
Hub compatibilityWireless alarm accessories pair with the T10 / T11 / T30 WiFi alarm hub; W1 / W5 / W6 and HP03W are standalone Wi-Fi devices that need no hub
Engineering scopeMagnet tolerance, lens geometry, RF behaviour, standby current and battery life are validated together as one system
OEM / ODM optionsHousing, colourway, modular face cover, logo, radio configuration, multipack packaging and kit composition
DocumentationModel-specific electrical parameters, the pairing matrix and certificate scope are supplied in the datasheet before ordering

Model Differences

One table is printed for both models. The only printed distinction is the housing form, so no detection-range or sensitivity difference is claimed between them.

ModelWhat differsSource
HP03WRounded-square housing with a central lens2026 catalog p27
IR08-W1 (web ref. HP03W)Round housing with a centred lens2026 catalog p27

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

HP03W

Positioning: The square-bodied member of the pair, matching the square smart door contacts in a white smart-home kit.

Best fit (recommended): Recommended for a room-corner installation in a Wi-Fi-only system: the published 90 degree / 4 m envelope is enough for a bedroom or home office and needs no hub.

IR08-W1 (web ref. HP03W)

Positioning: The round-bodied member of the pair, visually closer to a ceiling or table-top sensor than a wall plate.

Best fit (recommended): Recommended where a round form fits the interior better - for instance a hallway table or a shelf - using the same 4 m / 90 degree published envelope.

Key Characteristics

Door/window contacts, PIR motion sensors, sirens, push buttons, SOS buttons and remotes in one compatible accessory family

Magnet tolerance, RF behaviour and battery life engineered together

Modular face-cover and colourway options on the W1 / W5 / W6 contacts

Pairing matrix with T10 / T11 / T30 hubs confirmed in writing

Samples recommended for on-site range and compatibility testing

100% per-unit functional test

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.